Features:

• Accurate composition
• Appropriate results
• Accurate PH value

Asfoclean-B manufactured by Ashok Industry is a white chemical in powder form which is used for removal of oils, soils, lubricants, cutting coolants from various type of metal surfaces. Degreasing chemicals.

A 5% - 10% solution of Asfoclean-B with water is to be prepared in a container and parts/components that are to be cleaned are immersed in this solution. Heating of this solution will accelerate the degreasing process. Asfoclean-B degreaser can be used before plating, zinc phosphating, chromating, galvanizing, etc. It is available in two Packing of 10 kgs and 50 kgs.

Ashok Industry manufactures a wide range of degreasers and cleaners since 1960 and is an ISO 9001-2008 Certified Company.

Thelnikal LD is specially formulated to effectively remove thin oil, grease etc. Which are not of the drying type from both ferrous & non ferrous surfaces.

Thelnikal LD removes thin wet films which are not of the drying type; the oil film may have accumulated superficial dust and soils, which have settled on the surface in storage.

THELNIKAL-SP is specially formulated to effectively remove thin oil, grease and other superficial impurities etc. which are not of the drying type from ferrous surfaces by spraying. 

PARAMETER FOR SPRAY PROCESS: Concentration 20 Kgs. of chemical dissolved in water for every 1000 litre bath working volume. Dwell time 120 to 180 seconds. It works between Room Temperature to 55 deg C.

Used for removing adamantly adhearing oil, greasy matter, dried/cooked oils etc.  Can be used for degreasing both ferrous and non ferrous components.

Aluminum a soft metal has to be degreased properly.  Strong alkalis will etch the surface and care shouls be taken to avoid it.
THELNIKAL LD

The starting point of metal finishing is metal cleaning. Metal cleaning is the removal of undesirable soils and oils. Soil assumes many forms: machining, forming, grinding, stamping, drawing, and buffing etc. All leave behind residues superficial impurities. Oils, grease, soaps, protective oils also contaminate the surfaces

( Versatile Alkaline Cleaner for Aluminum surfaces by spraying )

Aluclean SP  is  specially formulated alkaline cleaner for cleaning and degreasing of aluminum surfaces in automotive, architectural and household usages.

After cleaning with Aluclean SP  it can be taken for any further treatments. 

(A Bio-degradable cleaner & degreaser  for  oxygen services)

Unlike petroleum-based solvents, aqueous cleaners such as Bioclean solutions that are typically non-flammable and contain little or no Volatile Organic Compounds (VOCs), which damage the atmosphere. Although they clean differently, aqueous cleaners perform as well as solvents. The product is designed to clean through brush at ambient and heated temperatures. But cleaning can be enhanced through spraying.

Application:

SCALGUN-HT can be used in Plastic or FRP/PVC lined M.S. Tank or container.

1. Prepare 20% - 50% by volume of SCALGUN-HT with water
2. Immerse the contaminated parts in this solution for 15-60 minutes at room temperature till parts are completely cleaned.
3. Rinse with fresh running water.
4. Immerse parts in 1-2% solution of COROBIT-ARP with water at room temperature at 60ºC for 2-3 minutes to neutralise and passivate the parts. Maintain the pH of this solution between 9-10.
5. Dry the surface, or dip in ASFOSIL-DW for preserving and protecting them for 3-4 months.

Our above product is an acidic composition containing organic inhibitors and surface active agents, suitable for use as a low cost general purpose descaling and derusting chemical specially for carbon steel or hot rolled steel & for cast iron parts by dip method.

Properties & Uses :

Rust and black scale oxides and heat treatment scales are readily removed from mild steel and ferrous alloys with negligible attack on the base metal because of the inhibitor content. Metal losses are reduced to as much as 6 to 8 times than using straight hydrochloric or sulphuric acids for pickling. Thus it enables long contact times to be used without fear of high metal losses.

Applications:

Although RUST SOLVENT is an excellent remover of rust, surfaces having extremely heavy scales or rust formation should be removed mechanically or by means of wire brush during dipping method.

I) Diiping Method:

Concentration:

1. For heavy contamination mix 1 part RUST SOLVENT with 1 part water by volume
2. For medium contamination - 1 part RUST SOLVENT with 2 parts water by volume
3. For light contamination - 1 part RUST SOLVENT with 3 - 5 parts water by volume

We offer our product PEDIGREE, WHICH 

• Functions at room temperature (20 deg. c)
• Removes thin, wet films of oil, grease etc;
• Removes mill scale,
• Removes certain types of heat-treatment scales, and welding scales.
• Does not leave any smut.
• But leaves the surface free from rust & mill scale.
• Does not produce fumes as a product of reaction between the chemical and the metal; but there will be slight smell, which can be sucked and blown away through hoods suitably placed above the pickling tank.